GB
54
GB
- If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
- The machine should be supplied via a residual current
device (RCD) with a tripping current of not more than 30
mA.
- Never replace the non-metallic cutting means with metallic
cutting means.
- Do not overreach and keep the balance at all times,
always be sure of the footing on slopes and walk, never
run.
- Do not touch moving hazardous parts before the machine
is disconnected from the mains and the moving hazardous
parts have come to a complete stop.
- Always wear substantial footwear and long trousers while
operating the machine.
- Do not connect a damaged cord to the supply or touch a
damaged cord before it is disconnected from the supply for
the reason that damaged cords can lead to contact with
live parts.
- Keep extension cords away from moving hazardous parts
to avoid damages to the cords which can lead to contact
with live parts.
- In case of accident or breakdown immediately stop the
machine.
- In case of abnormal vibrations, Switch the machine off
immediately, and check it for damages, if necessary, have
it repaired by a qualified person. It is recommended to
wear qualified protective gloves, and to take breaks at
regular intervals.
- When using the extension cord must not be lighter/thinner
than the used cable (H05VV-F), whose section is not less
than 1.5 mm
2
.