35
EN
means, shredding means bolts and other fasteners are secure,
the housing is undamaged and that guards and screens are in
place. Replace worn or damaged components in sets to preserve
balance. Replace damaged or unreadable labels.
g) Never operate the product while people, especially children or
pets are nearby.
Operation
a) Before starting the machine, make certain that the feeding
chamber is empty. And be careful of the rotating parts. Do not
touch.
b) Keep your face and body away from the feed intake opening.
c) Do not allow hands or any other part of body or clothing inside
the feeding chamber, discharge chute or near any moving part.
d) Keep proper balance and footing at all times. Do not overreach.
Never stand at a higher level than the base of the machine when
feeding material into it.
e) Always stand clear of the discharge zone when operating this
machine.
f) When feeding material into the machine be extremely careful
that pieces of metal, rocks, bottles, cans or other foreign objects
are not included.
g) If the cutting mechanism strikes any foreign objects or if
the machine starts making any unusual noise or vibration,
immediately shut off the power source and allow the machine
to stop. Remove the battery and take the following steps before
restarting and operating the machine:
i) inspect for damage
ii) replace or repair any damaged parts
iii) check for and tighten any loose parts
h) Do not allow processed material to build up in the discharge zone;
this may prevent proper discharge and can result in kickback of
material through the intake opening.
i) If the machine becomes clogged, shut-off the power source and
