39
♦
While working, check whether the automatic chain lubrication is working correctly. Check
the chain lubricator before and during work.
Sharpening the saw chain
NOTE
♦
You will find detailed information on sharpening in the sharpening set, e.g. from Oregon.
♦
Alternatively, you can use an electric saw chain sharpening device and follow the
instructions of the manufacturer.
♦
If you have any doubts about implementing the work, the saw chain
17
should be
replaced.
INITIAL USE
NOTE
♦
Comply with regulations regarding noise protection and local rules. Using the appliance
on certain days (e.g. on Sundays and public holidays), during certain times (midday
period, night time) or in certain locations (e.g. health resorts, clinics, etc.) may be
restricted or prohibited.
Switching on and off
Switching on:
♦
Press the safety lock-out
5
and keep it pressed and then press the ON/OFF switch
6
.
♦
After the starting process, the safety lock-out
5
can be released.
Switching off:
♦
Release the ON/OFF switch
6
.
Checking the automatic oil system
Before starting work, check the viewing window for the oil level
14
and the automatic oil
system.
♦
Switch the appliance on and hold it over a lightly coloured floor surface. The appliance
must not touch the ground.
♦
If there is an oil trace, the appliance is operating correctly.
♦
If there is no oil trace, clean the oil dispenser
25
or have the appliance repaired by our
Customer Service.
♦
To clean, wipe the residues from the oil dispenser
25
using a brush or cloth.
Adjusting the telescopic handle
The telescopic handle
1
can be adjusted continuously by means of the quick release for
