23
1.
LEFT SIDE BRUSH LEVER (OPTIONAL)
2.
BRAKE PEDAL
3.
PARCKING BRAKE
4.
RIGHT SIDE BRUSH LEVER
5.
FORWARD PEDAL
6.
MAIN BRUSH LEVER
7.
THROTTLE
8.
STARTER
9.
KEY
STARTING THE ENGINE
Before starting the machine, make sure the main brush and the side
brushes are raised from the ground. (POS.1 POS.4 POS.6)
Make sure that the parking brake is engaged POS.3
Push the throttle lever 1/3 forward – Lever POS.7
Pull the starter control completely POS.8
Turn the key clockwise of a notch POS.9
Complete the clockwise rotation until the engine starts, for no more
than 5 sec. If the engine doesn’t start the first time, you should repeat
the operation with intervals of 10 sec.
Let run the engine with throttle Check at MIN position for 3-5 min.
Lower the starter controls
Pull the throttle Check always to MAX to work.
TURNING OFF THE
ENGINE
Pull the throttle Check to MIN – Level POS.7
Turn the key in pos 0 – POS.9
Summary of Contents for RIDER 1201 SH
