33
1.
RIGHT PANEL FIXING SCREWS
2.
RIGHT PANEL
3.
REAR RUBBER FLAP FIXING METAL SHEET
4.
REAR RUBBER FLAP
5.
RIGHT RUBBER FLAP FRAME FIXING SCREWS
6.
RIGHT RUBBER FLAP FIXING METAL SHEET
7.
RIGHT RUBBER FLAP
REPLACING THE RIGHT SIDE
RUBBER FLAP
Turn off the engine and insert the parking
brake.
Remove the screw POS 1 and the left side
closure pos 2.
Loosen the retention screws of the right
rubber flap POS.5 by two turns and remove it
Unscrew the 5 fixing screws of the right
premigomma metal sheet POS 6 and replace
the rubber flap.
Put everything back together again
REPLACING THE REAR SIDE
RUBBER FLAP
Turn off the engine and insert the parking
brake.
Remove the dirt container
Remove the main brush
Remove the fixing metal sheet of the rear
rubber flap POS.3
Replace the rubber flap POS.4
Put everything back together again
Summary of Contents for RIDER 1201 SH
