32
ADJUSTING THE MAIN
BRUSH
Turn off the engine and insert the parking brake.
Raise the main brush lever
Open the left side door and remove the right side.
Unloose the fixing screws of the main brush hubs and move
them forward. There should be 10 mm from the support.
If the brush is worn, move the hubs in the direction of the
arrow (forward). If you replace the brush with a new one,
bring the hubs in the opposite direction of the brush (back).
After adjusting the main brus, screw completely the hubs’
screws, remount the right side and close the left door.
Summary of Contents for RIDER 1201 SH
