Commissioning
AirCop
42 from 135
20001.1
12/5/2020
Original operating instructions
7
Commissioning
This section contains information on the commissioning of the electrical device.
The purpose of commissioning the electrical equipment is to check its functions and
characteristics, as well as to detect and eliminate faults.
Installation site and room size
The
AirCop
should be mounted at a height of about 2m, centered on a wall and
should not be exposed to direct sunlight.
In principle, CO2 is very volatile and is distributed relatively evenly throughout the
room. The guideline value for an
AirCop
is the room size of approx. 75 sqm. This
specification refers to rectangular rooms. For rooms with a special cross-section,
such as a bay window, an L-shape, or many room dividers, another
AirCop
should be placed in the less accessible area, if necessary.
Putting electrical appliance into operation
To put the
AirCop
into operation, the supplied power supply unit is connected to
the micro-USB port provided for this purpose.
Functional test:
After plugging the power supply to the device, it briefly lights up white and then
changes its color according to the current CO2 concentration in the room.
Summary of Contents for AirCop
Page 107: ...Soluci n de problemas...
