85
2504708-03-02/21 (translation of the original operating instructions)
Operating Instructions
Light Grids/Light Curtains LCA 2
EN
NOTICE
Damage to the plastic surfaces on the front could increase the scattering angle. The safety function is
then no longer ensured. As a consequence, the distances of reflective surfaces from the transmitter
and receiver may need to be recalculated.
13.3. Maintenance
The system does not require any specific maintenance.
Repairs to the device are only allowed to be made by the manufacturer.
Important!
If there is a malfunction that cannot be identified, the machine must be stopped and EUCHNER customer
service contacted. See chapter: Service
For prompt diagnostics and troubleshooting, please state data items 1– 7 with your inquiry.
The following data can be found on the type label:
1. Order number (six-digit number)
2. Designation
3. Firmware version (V X.X.X)
Also state the following data:
4. Date of purchase
5. Operating time
6. Type of use
7. Fault found
ESPE
97ZL
III
17
IP65
IP67
Electro-sensitive
Protective
System response time
Power consumption
ID.NR
SER.NR.
ESPE
97ZL
III
17
IP65
IP67
Electro-sensitive
Protective
System response time
Power consumption
ID.NR
SER.NR.
production year
2D Bar code company ReeR (S/N + P/N)
1) Technische Daten
(siehe Tabelle 2503382) /
1)
technical specifications
(see table 2503382)
PIN distribution, see table 3)
Euchner designation
Euchner Ident.-Nr. /
Euchner ident.-No.
Bsp.: Seriennummer /
e.g.: serial number
Euchner firmware version
(see table 2503382)
2.0)
2.1)
2.0) Schutzfeldhöhe
2.0)
Detection capability
Protected height
2.1) Anzahl Lichtstrahlen
2.1)
Number of beam
Lens pitch
Euchner Bezeichnung /
Figure 24: Type label LCA
Summary of Contents for LCA 2 Series
Page 44: ......
Page 45: ...EN Operating Instructions Light Grids Light Curtains LCA 2 ...
