11
123914-01-05/15 (translation of the original operating instructions)
Operating Instructions
Key Adapter CKS-K-AS2A-U-C20-PC
EN
9.3. Functional check
WARNING
Danger of fatal injury as a result of faults in installation and functional check.
Ì
Before carrying out the functional check, make sure that there are no persons in the danger area.
Ì
Observe the valid accident prevention regulations.
9.3.1. Electrical function test
After installation and any fault, the safety function must be fully checked. Proceed as follows:
1. Switch on operating voltage.
¨
The machine must not start automatically.
¨
The key adapter carries out a self-test. The LED then flashes green (3 min).
2. Insert key.
¨
The LED illuminates green.
3. Enable operation in the control system.
4. Remove key.
Ì
The machine must switch off and it must not be possible to start it as long as a key is not inserted.
Ì
The LED illuminates yellow.
Repeat steps 2 … 4 for each key adapter.
