KTI-4
Telephone Interconnect Adapter
http://nexedge.kenwood.com
Expand
Your Reach
Kenwood now offers an easy way to
add telephone interconnect to your
NEXEDGE
®
trunked system.
The KTI-4 Telephone Interconnect Adapter connects
NEXEDGE
®
NXR-700/800-based trunked system to analogue
telephone patch such as the Zetron Model 30 / Model 735,
providing outbound radio to phone system calls and phone
system to radio calls. The KTI-4 serves as modulator or
demodulator between the NEXEDGE
®
digital system and
the analogue PSTN/PABX system. KTI-4 units can be
installed at trunked site or anywhere in the world through
a VPN connection. Offices located anywhere can call radio
users on a factory floor or in the field and vice-versa.
KTI-4 Interconnect Adapter
Web browser interface
Main features
•
KTI-4 On-site & Off-site Installations
•
Up to 6 KTI-4 Lines per Trunked Site
•
Up to 100 KTI-4 Lines per Trunked Network
•
Independent Inbound & Outbound Calls Enabled
•
Speed Dial:
z
Limit Calls to Specific Phone Numbers / PABX Extensions
z
255 Numbers Max. (32 digits per number)
•
Call Restrictions Settings:
z
Permit / Inhibit Toll, Long Distance and International Dialing
z
Permit / Inhibit Pay Per Call Services
•
AMBE+2
™
Vocoder (digital / analogue speech conversion)
•
NXDN
®
Scrambler: Secure Voice in Both Directions
•
Customisable DTMF Command Sets
•
DTMF Tone Timers:
z
Match Interconnect Brand / Model
z
Match Phone System Requirements
•
Status LEDs: Power, Communications, Full Duplex, 100-Base TX
Note: The NEXEDGE
®
KTI-4 requires an external telephone patch that meets telephony regulations in
the country of use and compatible with KTI-4 specifications (see back).
