CLEANING the etzMAX
Cleaning Schedule:
For commercial use, we recommend cleaning on a daily basis
or after grinding 1000-1500g of coffee.
Fig. 13
Fig. 14
Fig. 15
Fig. 16
NOTE
: To remove remaining coffee powder (stuck in between the sealings),
occasionally (after cleaning) turn macro ring to finest setting (Click 1) with the
empty grinder running
and back to your settings.
Rotate bean-blocker handle from OPEN to the front. Insert portafilter / place cup and
clear grinding chamber by grinding until empty (8.5g). Remove portafilter.
Disconnect from power supply
.
Push both locking levers backwards as far as they will go. Lift off hopper (ensure lid is
closed) and place aside (Fig. 1). Close both locking levers. To remove portafilter
holder, pull it off the hook. Mark down settings!
Remove adjustment by turning the macro-ring counterclockwise (Fig. 14) until you
feel no more resistance. Slowly pull it downwards and out (Fig. 15).
Open locking levers (Fig. 1), place back hopper and close locking levers (Fig. 2).
Carefully rotate bean-blocker handle all the way to the back to OPEN position
(Fig. 2). Connect to power supply.
To clean grinding chamber, insert bottlebrush from above through the hopper
opening. Use small brush to clean the coneholder. If removing coneholder for
cleaning, ensure it`s perfectly snapped in when reassembling.
Reassemble adjustment in reverse order
(reposition at 8 o`clock, see marking
before mounting, Fig. 16). Once
snapped in properly, turn and return to
your previous settings. Insert portafilter
holder / platform onto center hook
(Fig. 5).
NOTE:
To clean the grinder or in case of clogging, IT IS NOT NECESSARY to open
the top cover lid. The lid only needs to be opened to replace etzJET (grinding
mechanism) or User Interface.
