MD-109 User Manual
28
Figure 2-10: Set SMS password
2. Use AT commands to remotely modify IP address and port within
MD-109
1)
In order to use AT commands to modify IP and port within
MD-109, the MD-109 must appear online in mServer.
2)
Methods: Select the device in mServer, right-click it and
select "Remote Configuration", at the left part of the
dialog, input the following command in "Command
List": AT+MSERVER=IP
，
PORT
For example, AT+MSERVER=eyun.etungtech.com,8080
After that click button "Run", if all operations are correct, in
the list of "Response" at the right part, an "OK" will appear.
Then MD-109 will be offline from this mServer, and
connect to the new data center and port.