ETS ETS.A, Operating Manual

Page: 17 / 24

Manufacturer
www.ets-by.by
Distributor
www.metrotec.ee
17
6. Run the application DUTConfig. In the application window (Fig. 18) select type box Analog sensor .
Figure 18. Selecting Sensor Type
7. In the window displayed next (Fig. 19) indicate the connection port. Press the button Connect.
Figure 19. Calibration Window
When the sensor has been successfully connected, the application will indicate the connection (the main window
of the application will display the notification message
Connection: on ) (Fig. 20).
Figure 20. Connecting the Sensor
8. Connect probe to the
sensor’s centr
e electrode.
IMPORTANT NOTE: DO NOT touch the electrode!