20
6.1 Running the ETS Test Suite Manager program
To run the program proceed as follows:
1. Select ETS Test Suite Manager
2. If the computer is running Windows 7 a “User Account Control” window
will pop up. Click on “Yes”.
3. The program will open
4. Select “Tests”
5. Enter all desired information. Those fields in yellow are Default fields
where information can be retained for subsequent testing.
6. Select “Start Test”.
7. You will then be prompted on how to proceed.
8. When asked to “Remove bag for calibration” make sure the clamping
lever is down before clicking “Ok”.
9.
After running a test the prompt will ask “Do you want to save
data?”. Review the waveforms to make sure all discharges are
correct. If not, click “No” and rerun the test sequence on the bag.
10. To generate a report click on “Reports” then enter the “Ref #”.
11. Archived reports can be brought up by entering the respective “Ref #”.
6.2 Removing ETS Logo at Bottom of Report
To remove the ETS logo at the bottom of the report proceed as follows:
1. Close the program file
2. Go to “Programs” in the computer program file
3. Select ETS
4. Select ETS Test Suite Manager
5. Right click on
Esd1131.rpt
and select “RENAME”
6. Change this file to
Esd1131-Logo,rpt
7. Then right click on file
Esd1131-NoLogo.rpt
8. Select “RENAME”
9. Change file name to
Esd1131.rpt
6.2 Installation
If the software has to be reinstalled or installed on another computer, follow the
installation instructions contained on the disc.
6.3 Customer
Support
For customer support, contact ETS at 215-887-2196 or by e-mail
<[email protected].
10/10
