50
|
Operation
Viewing Images from the Camera
When the camera is powered on, it will take up to one minute to
start up.
To view an image from the camera, simply turn on your computer. With the
current view from the camera displayed in Internet Explorer®:
1.
Click on the area of the screen that you want to view, and the camera
pans and tilts to the specified area.
2.
Zoom in and out on the current view by rotating the roller wheel on the
mouse.
I
F THE
C
AMERA
S
TOPS
W
ORKING
If the camera suddenly shuts off during operation, turn off the battery pack and
charge it. See
Charging the Battery Pack
on page 56 for complete charging
information.
If the battery pack is fully charged and the camera still will not turn on, contact
ETS-Lindgren for assistance.
Using Multiple Cameras
To set up a multi-camera configuration using one Internet Explorer browser
window per camera, see
Arranging Multi-Camera Images
on page 51. To set up
a multi-camera configuration using one Internet Explorer browser window for all
cameras, see
Setting Up a Multi-Screen Configuration
on page 51.
Summary of Contents for 4340
