ETS-Lindgren 4340, User Manual

Page: 33 / 65

Install Optional Components
| 33
7.0 Install Optional Components
Before installing any components, follow the
safety information in the ETS-Lindgren
Product Information Bulletin included with your
shipment.
To install the following configurations and components:

If you have a chamber with a shielded control room
—See the next
section.

If you have a tripod mount (for use with or without a shielded control
room)
—See page 37.

If you have a multi-camera system (for use with or without a shielded
control room)
—See page 42.
A 10/100 network switch is included with your order. If you are
installing a multi-camera configuration, you will install the
10/100 network switch. If you are installing a single-camera
configuration, you will not install the switch. In that case, store the
10/100 network switch in a safe location for future expansion of your
Model 4340 Digital Camera System (CCTV).
If You Have a Chamber with a Shielded Control Room
In addition to mounting the camera from the wall or ceiling, a shielded control
room requires you to install a fiber optic-to-Ethernet converter, an Ethernet cable,
fiber optic cables, and fiber optic feedthrough connectors.
See the diagram on the following page.
To set up the computer, see page 47.