ETS-Lindgren 4340, User Manual

Page: 7 / 65

Introduction
| 7
1.0 Introduction
The ETS-Lindgren Model 4340 Digital Camera System (CCTV) is designed to
monitor tests conducted in anechoic or reverb chambers and large test cells
where moderate EMI field strengths are present. Depending on the configuration,
the camera is connected to a personal computer outside the chamber by either
Ethernet or fiber optic cables. When the camera and computer are on, the
camera image displays in a browser window at the computer. From the browser
window you can control these camera features:

Pan and tilt
—
Move the camera lens up and down, and from side to
side to create a wide area of vision.

Zoom
—
18x optical zoom with 12x digital/electronic zoom enabling
216x zoom; 36x extra optical zoom under VGA resolution with
12x digital/electronic zoom enabling 432x zoom.
Standard Configuration and Components
The standard configuration for the Model 4340 CCTV is installed into a chamber
without a shielded control room.
See the diagram on the following page.