ETS-Lindgren 4340, User Manual

Page: 13 / 65

Introduction
| 13
H-491009 Tripod
The H-491009 tripod includes a 1/4
–20 thread center pole and a
3/8-inch thread center pole. Use the 3/8-inch thread center pole to
mount the camera onto the tripod.
This dielectric tripod is the preferred
method for mounting field probes for
making unperturbed field measurements. It
includes a 1/4
–20 UNC threaded stud for
mounting any ETS-Lindgren probe with a
tripod mount. It is designed with an
adjustable center post and a rotating
mount.
About Installation and Setup
This manual provides instructions to install the Model 4340 CCTV into a chamber
without a shielded control room, including how to mount the camera on the wall,
from the ceiling, or on a tripod. Steps to install the optional components are also
included. For a list of optional configurations and components, see Optional
Configurations and Additional Components on page 10.
To install a configuration of the Model 4340 CCTV other than those described in
this manual, please contact ETS-Lindgren for more information.