Operation
|
25
7.0 Operation
Before placing into operation, follow the safety information in the
ETS-Lindgren
Product Information Bulletin
included with your
shipment.
With the assembly of the turntable complete, the Model 2090 Multi-Device
Controller (or next generation ETS Lindgren controller, if applicable) must be
connected to the unit and power applied to both the motor base and controller.
See the controller manual for complete information on connecting the fiber optic
cable and operating the controller. A manual is included with each controller and
is also available for download from
www.ets-lindgren.com
.
26
|
Operation
This page intentionally left blank.
List of Assembly Drawings
|
27
Appendix A: List of Assembly Drawings
Following is a list of the assembly drawings located in the back of this manual.
Prior to assembly and installation, review the drawings. Refer to the drawings
during assembly and installation for detailed information.
2187–2.0:
2-meter turntable (3 pages)
2187–3.0:
3-meter turntable (2 pages)
28
|
List of Assembly Drawings
This page intentionally left blank.
