LUNA 24
CHASER
Change Programs:
All faders on zero, GRAND MASTER on 100%.
Change mode on:
Press MODIFY-key and grey SEQUENCER-key simultaneously.
The respective LEDs are illuminated. On display CHASER is flashing.
Real or blind:
Live on output changes are only appearing if you moved up the SEQUENCER-fader
after
activating the change mode.
If you don’t do so the changes will be produced „blind“ by the PREVIEW-LEDs.
By doing so you can change while performing a chaser program another (or even the
performing) program.
Change scene:
Press STEP/GO- or STOP/BACK-keys to select next step.
Pick up the selected channel value with respective PRESET-fader and change it.
Store changes:
Press STORE- and MODIFY-keys simultaneously.
(STORE only stores the actual output status.)
Delete step:
Press DELETE-key for 2 seconds. MODIFY-LED illuminates yellow.
When it is illuminated green the selected step is deleted.
Insert step:
Select step. Insert the new step ahead of it.
Press ADD STEP (CHASER MODE-key) for 2 seconds.
MODIFY-LED illuminates yellow. When it changes to green the new step is inserted.
Copy a scene:
Press FLASH-key of selected scene. (FLASH MODE = PREVIEW).
Press simultaneously STORE-key.
The scene is copied on the selected step on CHASER.
Copy a
Select the step you want to copy with the NEXT-keys (SOUND- and SPEED-keys). chaser step:
On display NEXT is illuminated.
Now you can choose any other program.
Press simultaneously STORE- and MODIFY-keys to store this scene on the previously
chosen step in CHASER.
It can be previewed with the SEQUENCER-key (FLASH MODE = PREVIEW).
Pressing STOP/BACK or STEP/GO goes back to that step.
Stops:
Usually the program continues to the last programmed step and then restarts.
You can set stop marks for partial runs: the program then stops at this mark.
Press MODIFY- and SPEED-keys simultaneously to insert or to delete a stop mark.
On display an ‘S’ ( = STOP) is flashing by the program number.
Quit change mode: Press MODIFY-key.
Unstored changes - MODIFY-LED illuminates red - are lost.
Adjust Audio-Level:
Press MODIFY- and SOUND-keys simultaneously.
On display LED bar shows the audio-level.
Change level with SPEED-fader. The old level has to be picked up first.
In zero position on display an ‘A’ is shown.
The music level will then be controlled automatically.
After you have set the music-level press MODIFY-key.
ESCAPE
MODIFY
+
SEQUENCER
ESCAPE
MODIFY
+
STORE
DELETE
2 sec.
CHASER
MODE
ADD STEP
2 sec.
STORE
+
SPEED
NEXT
ê
SOUND
NEXT
é
ESCAPE
MODIFY
+
STORE
ESCAPE
MODIFY
+
SPEED
NEXT
ê
ESCAPE
MODIFY
ESCAPE
MODIFY
+
SOUND
NEXT
é
CHASER -
3
