LUNA 24
CHASER
Contens:
p. 1 General
Programming
- program a sequence
- delete old program
p. 2 Recall
- choose running mode
- choose crossfading mode
- prepare new program
p. 3 Change programs
- change scene
- insert scene
- delete scene
- copy scene
- single or partial runs
Adjust audio-level
General Information:
The chaser puts different scenes in sequence to output.
The sequence can be controlled manually or automatically with SPEED-fader or
synchronized to the music.
10 different sequences can be programmed.
The according number is shown on display at „PROG“ (red).
Choose with arrow-keys below.
Each program can hold up to 99 steps.
The step number is shown on display at „STEP“.
SEQUENCER
0
1
2
3
4
5
6
7
8
10
9
STEP
GO
STOP
BACK
CHASER
M O D E
(ADD STEP)
PROG
STEP
CHASER
Programming:
All faders on zero, GRAND MASTER- and MASTER A-faders on 100%.
Start programming Press MODIFY- and SEQUENCER-keys simultaneously.
mode:
Both LEDs are illuminated. On the display „CHASER“ is flashing.
Delete old program: Press DELETE- and grey SEQUENCER-keys simultaneously for 2 seconds.
On the display in position STEP an „E“ is shown for empty.
Step by step:
Create scene with PRESET-faders.
Store by using STORE-key.
Next step (STEP) is announced (if it is slightly darker = empty).
Keep repeating if you want to add more steps.
Quit programming Press MODIFY-key.
mode:
Unstored changes - MODIFY-LED illuminates red - are lost.
ESCAPE
MODIFY
+
SEQUENCER
2 sec.
+
SEQUENCER
DELETE
STORE
ESCAPE
MODIFY
CHASER -
1
