Beamer R2 Rev 1.0
Page 9 of 56
6/13/2007
2.2 MAINTENANCE SCHEDULE
The maintenance intervals in the follow table are based upon average riding conditions. Riding in
unusually dusty areas may require more frequent servicing. E-TON recommends that all maintenance
and inspections be performed ONLY by a qualified and fully trained technician.
INITIAL
SERVICE
REGULAR SERVICE
(First week)
(Every 30 operating
days)
EVERY
YEAR
Fuel Line
I
Throttle Operation
I
I
I
Air Filter system &
Element
I
C
R
Spark Plug
I
R
Carburetor Idle Speed
I
I
I
Brake Shoe Wear
I
I
I
Brake System
I
I
I
Nut, Bolt, Fastener
I
I
I
Wheels & Wheel Nuts
I
I
I
Steering System
I
I
Suspension System
I
I
C.V.T. Air Filter
C
R
Air Induction Reed Valve
I
C/R
Transmission Gear Oil
I
R
Note –
I: Inspect and Clean, Adjust, Lubricate, or Replace (if necessary)
C: Clean
L: Lubricate
R: Replace
2.3 FUEL TUBE
Inspect the fuel lines for deterioration, damage, or
leaks, and replace if necessary.
2.4 THROTTLE OPERATION
Inspect for smooth throttle lever full opening and
automatic full closing in all steering positions.
Inspect for deterioration, damage, or kinking
in the throttle cable. Replace if necessary.
Check the throttle lever. Free play is 5-10 mm at the tip
of the throttle lever.
Disconnect the throttle cable at the upper end.
Lubricate the cable with commercially available lubricant to prevent premature wear.
www.Get2itParts.com
www.Get2itParts.com
www.Get2itParts.com