Beamer R2 Rev 1.0
Page 12 of 56
6/13/2007
2.10 WHEELS AND TIRES
Inspect the tire surfaces for cuts, nails, or other sharp
objects. Check the tire pressure at cold tire condition.
The standard tire pressure is 2.5±0.3 kgf/cm2
2.11 GEAR OIL
Transmission gear oil needs to be changed every year
or after every 3000 miles of service.
The drain bolt is located at the rear of engine.
Remove the drain bolt and loosen the fill bolt to drain
the transmission gear box.
Inspect the drained oil for foreign materials. If the oil
contains a high concentration of metal shavings or
powder, disassemble the transmission for further
inspection.
Reinstall the drain bolt and refill the gear box with
100cc
/
3.4oz of SAE 80-90 Gear Oil
Note:
for best results, drain the transmission while
the engine is warm.
2.12 ENGINE STOP SWITCH
The engine stop switch is located beside the left handle bar.
In an emergency, pushing this switch will stop the engine.
The stop switch must be place in the on position, the top of the
switch pressed down, for the engine to start.
If your engine fails to start, check the switch.
Drain Bolt
Fill Plug
Turn
www.Get2itParts.com
www.Get2itParts.com
www.Get2itParts.com