Appendix F. User Manual
ETL Inc.
#584 Sangwhal-ri, Kanam -myon,
Yoju-kun, Kyounggi-do,
469-885, Korea 9 of 83
FCC ID : PFMTC7530
Report No:E03.0820.FCC.444N
Issue of Date: August 20, 2003
GEMPACK CO., LTD.
15” Web Base Terminal
Model: TC7530
•
Connect the power cord to a properly wired and grounded power outlet.
•
Make sure that any equipment attached to this product is also properly
connected to wired receptacles.
DANGER: THE TELECLIENT POWER SWITCH IS N OT THE MAIN DISCONNECT.
THE MAIN POWER DISCONNECT IS THE DETACHABLE LINE CORD.
♦
Warning Notices
A warning notice indicates the possibility of damage to a program, device, system or
data.
2.1.2.
Other Product Safety Considerations
Please note the following:
1. Do not expose the power supply, TeleCLIENT, line cord or monitor to moisture, dust
or corrosive gases.
2. Position the TeleCLIENT in a well-ventilated area; do not allow debris near the
ventilation holes.
3. Keep the TeleCLIENT away from heat sources, including direct sunshine and
heating appliances. The maximum operating temperature is 35ºC (95ºF).
4. Always unplug the TeleCLIENT before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use only a damp cloth for cleaning.
5. Make sure the TeleCLIENT is placed on a stable surface.
6. Do not block slots and openings anywhere on the TeleCLIENT.
7. Use only the type of power indicated on the marking label to operate this product.
Consult your dealer or local power company if you are unsure of the type of power
available.
8. Use only the proper type of power supply cord set (provided in your accessory box)
for this unit. Use a detachable type: UL listed/CSA certified, type SVT/SJT, rated as
10A 125V minimum, VDE approved or its equivalent.
9. Do not allow anything to rest on the power cord.
