Appendix F. User Manual
ETL Inc.
#584 Sangwhal-ri, Kanam -myon,
Yoju-kun, Kyounggi-do,
469-885, Korea 24 of 83
FCC ID : PFMTC7530
Report No:E03.0820.FCC.444N
Issue of Date: August 20, 2003
GEMPACK CO., LTD.
15” Web Base Terminal
Model: TC7530
that the requesting station is authentic. For a station to use shared key
authentication, it must implement WEP.
25. Check the
‘The key is provided automatically’
box if the network provides the key
automatically. Otherwise, leave the box unchecked and click
Modify WEP Key
to
supply all the necessary information on the screen, and then click
OK
.
26. Back on the
Access Point Setting
screen (Figure 4.9), check the box on the bottom
if the network uses IEEE 802.1x Authentication then choose the type. Click
OK
to
confirm.
27. Back on the
Wireless Networks Setting
screen (Figure 4.8), to select a preferred
network, highlight the desired access point from the ‘
Available Networks’
box and
click
Add
. Configure the access point as steps from 14 thru 19. When this is done
the ‘
Preferred Networks’
box should display the added access point.
28. If there are multiple access points displayed on the ‘
Preferred Networks box’
then
highlight the chosen access point and use
Move Up
and
Move Down
buttons to
prioritize the list. Top of the list has the highest priority.
29. Click on the
Advanced
button (
Figure 4.10
).
Figure 4.10
Advanced Wireless Setting
30. Choose Networks to access.
31. Check the ‘Automatically connect to non-preferred networks’ box
ONLY IF
the
terminal is allowed to make connection to all the available access points.
32. Click
Close
to confirm, then click
OK
to finish wireless network settings.
