6
5
Preparation before Use
Turn the power switch from OFF to ON.
1. Power on
1
2
3
2. Connect PSTN Land Line
1
2
1
2
3. Installation
1) Wall Mounting
Fix the wall mounting bracket on the wall with screws. Wedge the panel on the
bracket, make sure they fit well.
2) Standing on the Desk
Mount the desktop bracket, and then put it on the desk.
3
1
2
Plug the output connector of AC adapter
into the adapter interface of control panel.
Plug the AC adapter to wall power socket.
S2 is a PSTN alarm system which will auto dial the
pre-stored phone number when the system
detects intruders.
Please make sure the panel has been
connected to PSTN land line to ensure safety.
Connect the smaller connector of provided telephone cable to the PSTN land line
interface at the back side of the pane.
Connect the other end of the telephone cable to the signal output
provided by PSTN land line operator.
Rear Side
Buzzer Tamper Switch
Speaker
Backup Batteries
AC Adapter Interface
Power ON/OFF
PSTN Land Line Interface
Interfaces for
Wired Sensors
MIC
Output Wired Siren
( 500mA)
≤
Output for Electronic
Lock
NC Input for
Wired Sensor
(24H Zone)
NC Input for
Wired Sensor
(Normal Zone)
