eTIGER S2, Manual

Page: 7 / 31

12 11
System
Settings
Date And Time
Entry Exit Delay
Backlight Time
<00S>
Auto Arm/
Disarm
Edit Welcome
Control by
Phone
Linecut Alarm
Keypad Tones
Access Code
Ringing Times
Date
Date Format
Time
Entry Delay <000S>
Exit Delay <000S>
Auto Arm Time
<00:00:00>
Auto Disarm Time
<00:00:00>
On
Off
Admin Code
User Code
Duress Code
On
Off
On
Off
Input 6 Digits
<Default Code 123456>
Input 4 Digits
<Default Code 1234>
Input 4 Digits
<Default Code 1111>
Alarm Voice
Record
Play
History
Siren Setup
User ID<1234>
Arm Upload
Disarm Upload
Reset
Wired Siren
Wireless Siren
Built-in Siren
Siren Alert Time
<300S>
Input 4 Digits
On
Off
On
Off
Siren Switch <On/Off>
Arm/Disarm Tone <On/Off>
Siren Switch <On/Off>
Arm/Disarm Tone <On/Off>
Siren Switch <On/Off>
Arm/Disarm Tone <On/Off>
Settings
1. Alarm Phone Number Setup
User can set 6 user phone numbers and 2 CMS phone numbers. When connecting to
CMS, system will dial CMS phone number to upload Contact ID reports while alarming
and then dial 6 user phone numbers in sequence one by one. System will dial all the user
phone numbers in 3 cycles until the phone is answered or any press on phone buttons.
Log on the menu, choose “Phone Numbers”, press .
Press or , choose “Add Phone Number”, press .
Press or , choose “Alarm Number1 ~ 6”, press .
Input alarm phone numbers in order, press . If group extended telephone number is
used, 0# or 9# need to be added in front of the phone number.
[Enter]
[ ] [ ] [Enter]
[ ] [ ] [Enter]
[Enter]
Add Alarm Phone Number
Delete Alarm Phone Number
Note!
If user wants to set CMS center phone number, please refer to “Connect to CMS Center”.
Log on the menu, choose “Phone Numbers”, press .
Press or , choose “Delete Phone Number”, press .
Press or , choose “Alarm Number1~6”, press .
Delete the alarm phone numbers in order, press again
[Enter]
[ ] [ ] [Enter]
[ ] [ ] [Enter]
[Enter]
1
2
3
4
When LCD is activated, input the admin code, and then press to enter setting
menu.
[Enter]
1
2
3
4
Log on the menu, press or , choose “Accessories”, press .
Press or , choose “Remote & Keypad”, press .
Press or , choose “Add”, press .
[ ] [ ] [Enter]
[ ] [ ] [Enter]
[ ] [ ] [Enter]
2. Add/Delete/Edit Accessories
Add/Delete Remote Controls or Wireless Keypads
Add
1
2
3
4
If user want to check or edit the stored phone number, enter “Alarm Number1~6”to
check and edit.
Note!
The control panel only receives signal from accessories after they are connected to the
control panel.
LCD display will show “Please connect”, press any button from the remote control to
enable signal transmitting to the control panel. When a beep is heard, LCD display will
show “Remote (01-10)”, connection succeeded.