10
EtherWAN Series Router Hardware Installation Guide
Operation
Cable and connector must be rated for minimum 76°C (168.8°F)
Operation
Reset / Factory Default / Safe Mode
The table below shows how the reset button can be used to accomplish the below
function.
Reset Button
Note:
Before servicing this product ensure the power source has been disconnected.
Electrical installations should be performed by personnel thoroughly trained in
safe electrical wiring procedures.
Mode
Description
LEDs
System Status
Restart
Press and Release the
Reset button when the
router is running
Power LED will
begin to blink
amber
Reboots. All configuration and
files will remain the same.
Factory
default
Press Reset and Hold for
10 seconds when the
router is running
All LEDs flash
Amber, release
Reset button, then
Power LED flashes
Amber.
Reboots and resets the
configuration to the
EtherWAN factory default
configuration. All
configuration, user IDs,
passwords and security
certificates are deleted.
Safe Mode
Press the Reset button
while powering up
All LEDs, except
power blinking
Amber
Saves the startup config
Boots with no config file
Allows you to do setup
mode
