The I/O Pins and Push Buttons
Below is a screen shot of the
RMS-200
I/O overview page. Here you can choose which of the
boards Alarm or I/O pins to control.
RMS-200
has 5 dedicated Alarm Pins that have a
corresponding LED. Use them with common door contacts to monitor entry points.
RMS-200
also has 4 general purpose pins that can be set as Inputs or Outputs. These multi purpose I/O
pins can be controlled or read from either the web page interface or a command shell.
RMS-
200
also has 2 micro push buttons that have special attributes when the
RMS-200
board is
booting. After the
RMS-200
board is finished booting these buttons are free for you to use for
controlling your devices.
Summary of Contents for RMS-200
Page 1: ...RMS 200 C EtherTek Circuits...
Page 2: ...O w n e r s M a n u a l...
Page 48: ...Block Diagram...
