Etesia ET MOWER ETM105, Original User Manual

Page: 42 / 56

42
3• USING TEXT MESSAGES TO CONTROL
THE GPS/GPRS MODULE
‘Status’
command sent from ‘ALARM_PHONE’
Robot answering confirmation that CONTROL_PHONE has been set. In
the mean time, the robot has also switched off (Robot=0).
‘Clearctrlphone’ command sent from ‘ALARM_PHONE’.
Robot answering confirmation that CONTROL_PHONE has been
cleared.
‘Clearalarmphone’ command sent from ‘ALARM_PHONE’.
Robot answering confirmation that ALARM_PHONE has been cleared.
3•3 GETTING INFORMATION FROM THE
ROBOT THROUGH SMS
The 3 commands ‘Status’ , ‘Position’ and ‘MowerData’ can be sent
from any phone number.
The sender is receiving a confirmation SMS.
The ‘Status’ command is sending back:
- ID = unique identification number of the GPS/GPRS module embedded
in the robot
- AlarmPhone = phone number of the ALARM_PHONE
- CtrlPhone = phone number of the CONTROL_PHONE
-
AlarmPhone2
= phone number of the ALARM_PHONE2
- Robot = 0 (robot switched-off) or 1 (robot switched on)
-
Rev
= revision number of the GPS/GPRS module firmware