4
LED is workable in 100-220V/50~60Hz. Because line voltage may vary from venue to venue,
you should be sure your unit voltage matches the wall outlet voltage before attempting to
operate you fixture.
DMX Linking:
To ensure proper DMX data transmission, when using several DMX fixtures
try to use the shortest cable path possible. The order in which fixtures are connected in a
DMX line does not influence the DMX addressing. For example; a fixture assigned a DMX
address of 1 may be placed anywhere in a DMX line, at the beginning, at the end, or
anywhere in the middle. When a fixture is assigned a DMX address of 1, the DMX controller
knows to send DATA assigned to address 1 to that unit, no matter where it is located in the
DMX chain.
Operating Instructions
Operating Modes: You can use the CUBE5
™
RGBWA LED in 4 ways:
●
Sound activation
– The unit will activated by the sound signal.
●
Static display
– The unit will display the pattern in static way.
●
Auto Mode - The unit will automatically chase through the different patterns.
●
DMX control mode - This function will allow you to control each individual fixtures traits
with a standard DMX 512 controller.
DMX Mode:
Operating through a DMX controller give the user the freedom to create their
own programs tailored to their own individual needs. This function also allows you to use
your fixtures as pattern changing lights.
1. This function will allow you to control each individual fixture’s traits with a standard DMX
512 controller.
2. The Mini
PAR uses 6 DMX channels to operate. Please see “DMX Values and Functions”
for the DMX traits.
3. To run your fixture in DMX mode, plug in the fixture via the XLR connections to any
standard DMX controller . Set your desired DMX address following the set up
specifications that come with your DMX controller .
4. The unit can automatically recognize the DMX signal once the DMX connection is done.
