IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE
INSTRUCTIONS FOR FUTURE REFERENCE.
RAB fi xtures must be wired in accordance with the National Electrical Code and
all applicable local codes. Proper grounding is required for safety. THIS PRODCUT
MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION
CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF
THE PRODUCT AND THE HAZARDS INVOLVED.
WARNING: Make certain power is OFF before installing or maintaining fi xture.
No user serviceable parts inside.
GOOSENECK LED INSTRUCTIONS
1
1. Thread
the
Bushing
onto the
Arm
.
2. Feed leads through the
Arm
.
3. Mount
Housing
to
Bushing
with
three set screws. Check that
Bushing Gasket
is seated properly.
4. Tighten
all
Set Screws.
5. Loosen
Swivel Screw
and adjust
fi xture to desired angle. Tighten
Swivel Screw
.
6. To ensure weatherproof seal use
Tefl on tape on
Arm
threads or use
weatherproof silicone sealant be-
tween
Arm
and
Bushing
Housing Mounting
Bushing
Arm
Housing
Swivel
Screw
Set Screws (6)
1. Insert arm into
Wall Plate
.
Tighten
Set Screws
.
2. Make supply wiring connections in
recessed box with UL approved
connectors.
3. A universal voltage driver permits
operation at the following voltages,
50 or 60Hz.
13W 120V thru 277V
4W 120V thru 240V
4. Mount
Wall Plate
to the wall with
hardware appropriate for your
mounting surface.
5. To ensure weatherproof seal, apply
weatherproof silcone sealant around
the edge of the
Wall Plate
. This is
especially important with an uneven
wall surface.
Arm Mounting to Wall and Wiring
Set Screws
Bushing
Gasket
Wall Plate
Optional
Photocell
Note: These instructions do not cover all details or variations in equipment
nor do they provide for every possible situation during installation, operation
or maintenance.
Thank you for buying RAB lighting fi xtures. Our aim is to design the best quality products to
get the job done right. We’d like to hear your comments. Call the Marketing Department at
888-RAB-1000, or email: [email protected]
Pat. Pending
Input
Color
Lumens
Watts
Effi cacy(LPW)
CRI
Temp(K)
GNLED13Y
556
16 36
86 3000K
with Flood Refl ector & Frosted Lens
GNLED13YS
571
16 37
86 3000K
with Spot Refl ector & Clear Lens
GNLED13YR
535
16 35
86 3000K
with Rectangular Refl ector & Clear Lens
GNLED13N
643
15 43
87 4000K
with Flood Refl ector & Frosted Lens
GNLED13NS
643
15 43
87 4000K
with Spot Refl ector & Clear Lens
GNLED13NR
604
15 40
87 4000K
with Rectangular Refl ector & Clear Lens
Additional Lighting Facts labels see www.rabweb.com
