ETen M600, User Manual

Page: 19 / 225

1-6
3.
Connect the AC adapter plug to any household power outlet, and then
connect the round plug from the AC adapter to the power connector. The
Pocket PC starts to charge automatically.
4.
Cold Boot: Press and hold the “Power Button” with one hand, and use the
stylus tip to press the “Reset Button” with the other hand. Release the
“Power Button” and the “Reset Button” at the same time. Wait for the
Pocket PC to restart and follow the instructions on the screen to complete
screen alignment.
5.
It will take about 8 hours to fully charge the battery after the first time you
open the package. Subsequent charging will only take about 3 hours. After
charging, you can disconnect the AC adapter and carry the Pocket PC
around portably. To maintain smooth operation, charge the power
regularly.
6.
View the battery icon on the upper right corner to check the power
usage condition.
7.
The LED indicator on the upper right of Pocket PC will display the
charging and function usage status.
Charging Fully charged Insufficient power
Red LED lights up Red LED goes off Red LED flashes
Phone is on Caution or Warning
Green LED flashes Orange LED flashes quickly
If you need to charge the main battery by itself, you can insert it into the
charging slot at the back of the charger. The LED indicator on the side of
the charger displays the charging status.
Charging Fully charged No battery
Red LED lights up Green LED lights up LED is off