Copyright © 1985~ 2007, E-TEN Information Systems Co., Ltd. All Rights Reserved.
27
A. Leaning the top of Cover to lock the latch on main bracket. Slide your finger down to its bottom
case.
B. Make sure both sides are fitting well to the case.
C. Take care center part of the bottom, push it down to latch hole.
D. Finish.
TIPS. Always the top go first, or you will hard to get completed this part at the end.
Caution!! The surface of the Cover may easily been cut or get injury, stay alert of use any sharp tools.
Battery & Stylus, Battery Cover
Main Unit
P/N: 49005120
40009520
40009510
A. Put battery to right position of the main unit, watch the pins location.
B. Aim the tip of Stylus into the stylus hole.
C. Cover up the battery-cover, always the top go first.
D. Finish.
