Copyright © 1985~ 2007, E-TEN Information Systems Co., Ltd. All Rights Reserved.
15
A. Two screw holes are at bottom of the unit. Use T5-screwdriver to unscrew them both.
B. Use plastic-stick to pick a hole near the camera-button, dig it up by using a little strength.
C. Sliding stick to the top of cover, separate them from the bracket.
D. Sliding through bottom case by the same way.
E. Slightly move it along to the top, nicely to lifts the Cover up and remove it from the bracket.
F. Finish.
TIPS. Always the bottom go first, or you will hard to get this part disassembled at the end.
Caution!! Do not use over strength to do the works, other parts would be damaged when using the sticker.
Front Cover Assy
Receiver
P/N: 64041650
49005280
A. Remove receiver by using tweezers. Or, tapping it out by fingers.
B. Finish.
M/B
Keypad Module Assy
P/N: 40010600
