Copyright © 1985~ 2007, E-TEN Information Systems Co., Ltd. All Rights Reserved.
10
T Panel
Touch Panel test
Take stylus pen then draw few lines slowly around the screen
rims and center.
*Breaking lines and screen can’t alignment are not allowed.
Tap up-right corner to exit
AUDIO
Voice record/reply test 1. Tap Recording icon and talk to the microphone for 1-2 sec,
the voice will reply the recorded sound automatically.
2. Plug your headset and run the record/reply test again.
3. Tap Receiver, and tap “PASS” after hear a tone by phone
generated.
Tap up-right corner to exit
LCD
LCD color test
Tap screen repeatedly. Check color screen if normal or any
defective pixels on it.
Tap up-right corner to exit
BackLight
LCD backlight test
Tap “Back Light On/Off” and tap “scroll up/down” to test
backlight.
Tap up-right corner to exit
LED
LED indication test
Tap “ALL ON” then “ALL OFF” to check all indicative color LED
turns on/off, and tap PASS.
Tap up-right corner to exit
Vibrator
Vibration testing
Select “Vibrator On then Off” to check if device is vibrating.
Tap up-right corner to exit
BAT Chip
main battery test
Test main battery calibration.
Tap up-right corner to exit if screen shows PASS
Battery
Test battery switch
function
Follow the procedures and check screen shows “PASS!”
Tap up-right corner to exit
B&E Info
Read SW version
Tap “Read SW Version”, check the system software and
language version.
Tap up-right corner to exit
