17
Selador Series User Manual
Cooling Fan Filter Cleaning
Cooling fan filters should be inspected at a minimum every six months; more frequently
if fixtures are powered on for more than four hours per day
Use a vacuum cleaner to remove dust from each fan filter
In dusty environments or conditions involving the use of smoke machines, clean the
filters as follows:
•
Using fingernail or small flat-blade screwdriver, remove fan filter cover by prying
under one of the two locking tabs
•
Carefully remove foam fan filter from fan assembly
•
Gently wash foam fan filter in a solution of mild dishwashing solution and water
•
Thoroughly rinse each foam fan filter in clear water
•
Pat dry or air-dry filters
•
After filters are completely dry, reinstall by inserting them into fan assembly
•
Reattach the filters to the fixture
N o t e :
No user-serviceable parts are inside.
Fuse Capacities
All Selador Fixtures use 3AG 250V 32mm x 6mm fuses. Use the following capacity fuses
for all Selador fixtures.
Fixture Size
Fuse Value
11
2 A
21
4 A
42
8 A
63
10 A
