ETC Power Control Processor, Configuration Manual

Page: 58 / 64

52 Power Control Processor Configuration Manual
Relays
This page allows you to view the current status of all circuits in the panel, including:
• Relay output position
• Circuit number
• Breaker status
• Output level
• Load in watts
• Percentage of control level
You also have the option to turn circuits on and off from this screen.
Set Levels
This page allows you to set and release levels for any circuit or range of circuits in the panel.
You can use the displayed keypad or a connected
keyboard to input commands into the green
command window.
Once the command line reaches complete syntax it
will be automatically entered as signified by a “*” at
the end of the command line.
• If your system is divided into more than one
space, you will first need to select the desired
space using the “Select Space” field at top of
the screen. See
Spaces
on
page 10
.
• Use “and” and “thru” to select multiple
circuits or ranges of circuits.
• Use “rel” to release channels.
• Use “Release All” to release all current levels.
• Use “Previous” and “Next” to cycle through
successive channels.
• “Clear” clears the command window.
Output
position
Local
control
options
Command
window