Configure the Fixture
25
Set Menu
Set the Status Options
Navigate: Main Menu
→
Set
→
Status
Parameter
Value
Description
No DMX Mode
•
Close Shutter
•
Hold
•
Auto Program
Control mode when DMX is absent. The default value
is Hold.
Pan Reverse
•
ON
•
OFF
Reverse the pan movement of the fixture. The default
value is OFF.
Tilt Reverse
•
ON
•
OFF
Reverse the tilt movement of the fixture. The default
value is OFF.
Pan Degree
•
630
•
540
Change the pan rotation of the fixture from the default
setting of 540 degrees to 630 degrees.
Encoders
•
ON
•
OFF
Turn on or off the encoder feedback for pan and tilt
movement. You may want to turn off encoders when
working on a fixture so that you can move pan and tilt
without the fixture automatically moving back to
position.
Hibernation
•
OFF
•
1–99 minutes
Hibernation mode forces the LEDs and stepper motors
to power off when the fixture loses DMX control signal
for a set period of time. The default time setting is 15
minutes.
Refresh Rate
•
2.4 kHz
•
16 kHz
Set the refresh rate of the fixture. The higher 16 kHz
setting creates a beam with less "strobing" on
camera, but it is noisier than the 2.4 kHz setting.
P/T Home Mode
•
Standard
•
Tilt First
•
Pan First
Set the order in which pan and tilt homing is
performed.
•
Standard: the pan and tilt home procedures run
simultaneously.
•
Tilt First: the tilt home procedure runs to
completion, then the pan home procedure begins.
•
Pan First: the pan home procedure runs to
completion, then the tilt home procedure begins.
Dim Control
•
Master Base
Intensity
•
Independent
Base Intensity
Set the modules to which the Dimmer DMX channel is
applied.
•
Master Base Intensity: the Dimmer DMX channel is
applied to the Base, Flex, and Pixel modules.
•
Independent Base Intensity: the Dimmer DMX
channel is applied only to the Base module.
