12
SolaPix 19 User Manual
1
2
5
3
1.
Assemble the clamp (provided by others) to the Omega bracket and secure together using
appropriately sized hardware (not provided).
2.
Align the assembled Omega bracket and quick-lock fasteners into the respective holes on
the bottom of the fixture upper enclosure.
3.
Tighten each of the quick-lock fasteners fully, turning clockwise. You will hear and feel a
click when the fastener is fully secured.
4.
Repeat steps 1 through 3 for the second clamp and bracket.
5.
Attach the provided safety cable through the attachment point on the bottom of the
fixture upper enclosure and secure to the trussing system or other safe installation point.
Follow local codes and recommended safety standards for securing the fixture to the
installation location.
6.
Attach the fixture to the installation location using the installed clamps, using the clamp
manufacturer's instructions for a secure fit. When using the Omega clamp, close the
safety and fully tighten the clamp wing nut until secure.
7.
Inspect the installation prior to lifting the fixture overhead.
