ETC Installation Guide
ColorSource Linear v1.7
Install Secondary Lenses
2: Pivot
1: Loosen
You can use several optional
accessories with the
ColorSource Linear, including
secondary lenses (horizontal,
vertical, and round). You can
use either a single lens or two
lenses simultaneously, and
you can install them from
either end of the fixture.
For the Linear 2 and Linear 4
fixtures, order one accessory
for each 0.5 meter segment
(cell) of the fixture.
Spacer
Spacers for secondary lenses are included with the fixture. Use
these spacers to hold the accessories in position when multiple
lenses are used in the Linear 2 and Linear 4 fixtures.
1.
Loosen the thumbscrew on the access panel on either
end of the fixture.
2.
Pivot the access panel until you can access the slots
above the LEDs.
3.
Spacer
Secondary
lens
Secondary
lens
Slide the secondary lens
(or lenses) into either of
the slots above the LEDs.
4.
For the Linear 2 and
Linear 4 fixtures, position
spacers between the
lenses for the cells (in the
same slot as the lenses).
See image at left.
5.
Pivot the access panel
back into place and
tighten the thumbscrew.
ColorSource Linear
Page 15 of 20
ETC
