50
ArcLamp System Installation Manual
Terminate Normal Sense Input
WARNING:
Circuits that are installed without an accessible power
disconnect device cannot be serviced or operated safely.
AVERTISSEMENT :
Il est imprudent d'utiliser ou de réparer les circuits
installés sans qu'un dispositif de déconnexion de l'alimentation ne soit
accessible.
Note:
Power wiring should only be installed and terminated by a qualified electrician
and should follow standard wiring installation practices.
ArcLamp Emergency Driver 150
ArcLamp Emergency Driver 150
Sense Input Detail
Factory Wire Colors
Model
Color
Type
North America
and Europe
green/yellow
ground/earth
North America black
line/hot
North America white
neutral
Europe
brown
live
Europe
blue
neutral
1. See
Wire and Terminal Specifications on page 16
for specification of wire, strip length,
and terminal torque ratings. Prepare the wires accordingly.
2. Run ground, neutral and line (hot) wires between the ArcLamp Emergency Driver Sense
input terminals and a normal power branch circuit.
a. Terminate the ground wire (typically green/yellow) to the ground screw provided.
Insert the pre-stripped wire and tighten the screw to secure it in place.
b. Terminate normal neutral and normal line (hot) wires to the Sense input terminals.
•
Insert the neutral wire (typically white) into the Sense N terminal and tighten the
screw firmly to secure it in place.
•
Insert the line (hot) wire into the Sense L terminal and tighten the screw firmly to
secure it in place.
