16
ArcLamp System Installation Manual
Wire and Terminal Specifications
Terminal / Connector
Wire Range / Specification
Strip Length
Torque
Rating
ArcLamp Driver 150
standard and
emergency
100–277 V Power Input
ArcLamp Driver 150 standard and emergency
(line/neutral/ground):
2.5–4 mm
2
(14–12 AWG, solid or stranded)
7 mm
(1/4 in)
0.5 Nm
(4 in-lb)
ArcLamp Driver 350
and 700 standard and
emergency
100–240 V Power Input
line/neutral/ground:
0.5–1.5 mm
2
(22–16 AWG)
10 mm
(3/8 in)
none
24 V Power Output
(line/neutral/ground)
ArcLamp Driver 150 standard and emergency
models:
2.5 mm
2
(14 AWG solid or stranded). Follow
Class 1 wiring methods.
7 mm
(1/4 in)
0.5 Nm
(4 in-lb)
ArcLamp Driver 350 and 700 standard and
emergency models:
0.5–6 mm
2
(22–10 AWG, solid or stranded).
Follow Class 1 wiring methods.
10–12 mm
(3/8–1/2 in)
none
DMX In/Thru
RJ45 Connectors
Cat5e (or better) 0.2 mm
2
(24 AWG) or larger conductors terminated
to T568B standard
You must terminate the last driver in line with a DMX terminator plug
in the RJ45 Thru receptacle. See
RJ45 DMX Termination on page 22
DMX In/Thru Eight-pin
Connector
ArcLamp Driver 350 and 700 standard and emergency models: Belden
9729 (or equivalent)
A 120
Ω
resistor (not provided) is required to terminate the last DMX
device in a control run. See
DMX Cable Preparation and Termination
Refer to
Channel Electrical Specifications on page 8
for the limits on current, power, and
number of 4.4 W ArcLamps per output channel and driver.
Note:
All output channels have onboard electronic overload protection. See
Prepare for Wall-Mount Installation
Note:
Mounting hardware and installation location must support the weight of the
driver, conduit hardware, and all cable required for installation.
Wall-Mounting Supplies
The following supplies are required, but not provided, for ArcLamp Driver installation:
•
flexible conduit and conduit fittings
•
appropriate strain relief connectors for the installation type, as needed
•
Phillips screwdriver
•
four each mounting bolts or screws and wall anchors, as needed
