ETAS
Technical Data
XETK-S21.0B
-
User
Guide
33
7
Technical Data
This chapter contains information about the following topics:
• System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
• Data Emulation and Measurement Memory . . . . . . . . . . . . . . . . . . . . . . 35
• Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
• XETK Ethernet Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
• Environmental Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
• Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
• Test Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
• JTAG Timing Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
• Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
• Pin Assignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
• Mechanical Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
7.1
System Requirements
7.1.1
ETAS Compatible Hardware
Compact Hardware: ES51x, ES592, ES593-D, ES595, ES600, ES910 (INCA)
7.1.2
PC with one Ethernet Interface
A PC with one open Ethernet interface (1 Gbit/s or 100 Mbit/s, full duplex) with
RJ-45 connection is required. Ethernet interfaces that are implemented with an
additional network card in the PC must feature a 32-bit data bus.
Requirement to ensure successful initialization of the module
To deactivate the power saving mode
Choose in Windows System Control Center / Device Manager / Network
Adapter the used network adapter by double-click. Deactivate the "Allow the
computer to turn off this device to save power" option in the "Power Manage
-
ment" register. Confirm your configuration.
The manufacturers of network adapter have different names for this function.
NOTE
Half Duplex mode and Half Duplex Ethernet interfaces are not supported.
NOTE
It is imperative you disable the function which automatically switches to
power-saving mode on your PC network adapter when there is no data traffic
on the Ethernet interface!
