41
Etac / Prio / www.etac.com
1
4
2
3
5 mm
2 Nm
5 mm
1
2
3
4
5
30-70 mm
Elevating leg support with calf support
The calf support is height and depth-settable.
1. Loosen the screw, adjust the height of the calf support and tighten.
2. Loosen the screw that keeps the calf support in place.
3. Remove the screw and select the depth.
4. Insert the screw and tighten slightly. The calf plate should be
movable so that it follows the contours of the calf.
Never stand on the footplates as there is a risk of
tipping!
Don’t lift the chair by the leg supports.
Always make sure that the screw and footplate
knob are installed even if the footplate is not used.
Anti-tips
The anti-tips are foldable, turnable and height-settable.
Bear in mind the risk of tipping.
Always check the positioning of the anti-tips.
15. Settings, readjustments
Summary of Contents for Prio 13420305
Page 43: ...43 Etac Prio www etac com...
