17
Etac / Prio / www.etac.com
A
A
10. How to use
The push handle/bow handle, height-adjustable
Loosen the knob for the push handle lock (A). Install desired height.
Ensure that the push handle is in a "snap lock" position, tighten the
knob.
Make sure knobs are securely tightened. This is especially im-
portant if the chair is to be lifted with the user sitting in it.
Ensure that the push handle locking pin is always secured
under the push handle attachment.
Loosen push handle/bow handle
Loosen the knob for the push handle lock. Pull up the push handle until the locking pin engages in the track.
Insert a coin or a flat tool in the groove on the right side to unsnap the locking pin on the handle. Pull the push/pull
handle out of the attachment.
If back support height exceeds 60 cm, handles/push bar can-
not be detached.
Summary of Contents for Prio 13420305
Page 43: ...43 Etac Prio www etac com...