32
Assembly instructions are provided
with all accessories when they are
supplied by Etac.
12:2 Armrest, detachable, height adjustment
12 Assembly instructions accessories
2
Instructions are also available on our website.
www.etac.com
12:1 Seat cushion and comfort wedge
The cushion is cut to the required
depth at the front or back edge.
When measuring the length,
ensure that the cushion is prop-
erly positioned between the back
tubes with the rounded corners to
the rear.
The cushion is a stand-
ard model and is not
suitable for users with
sitting sores.
A comfort wedge is a useful ac-
cessory for the seat cushion. It
evens out the front edge of the
seat, giving even greater seat
comfort. Place the comfort wedge
in the cushion-cover’s inside pock-
et, under the cushion. The arrow
on the comfort wedge should be
on the top-side pointing forwards.
The detachable armrest comes
in two versions, with short or
long armrest guard. The armrest
attachment can be fitted in 2 dif-
ferent heights. In position 1 the
height of the armrest is settable
between 19 and 26 cm, and in
position 2 (standard) between 24
and 31 cm, with 1 cm intervals.
Tools: 10 mm spanner,
5 mm Allen key.
The lock lug is used both to set
the height of the armrest and
secure the side guard:
- Loosen the screw that fastens
the lock lug.
- Slide the guard up or down to
the desired height.
- Refasten the lug on
the side guard.
If necessary the right armrest can
be fitted on the left side and vice-
versa.
Tools: 3 mm Allen key.
Never use the armrests
to lift the wheelchair.
12:3 Padded cover, armrest
The detachable armrests can be
supplemented with a padded or
gel cover. The covers are manu-
factured in dark grey plush, or
alternatively black Dartex, and
they are washable.
(!) The padded cover makes the
armrest 1.5-2 cm higher.
(!) With 24" low pressure or solid
tyres in pos. C1, the armrest’s si-
deguard does not cover the front
edge of the rear wheel.
1
