2
3
1 General
The tool kit contains:
5 Allen keys: 6, 5, 5, 4 and 3 mm
3 Ring spanners: 13, 10 and 8 mm
1 Socket spanner: 24/19 mm
1
Phillips
screwdriver
The manual must be read thoroughly to avoid damage when handling and using the Cross chair.
is a warning triangle to indicate that special care should be taken.
(!)
provides advice and tips worth considering
Anti-tips
available as an accessory. At the correct setting they will prevent the wheelchair from tipping
backwards. We recommend all users to use the anti-tip devices, unless you are an experi-
enced user with absolute control over your wheelchair.
Cross
is a manual, cross-folded, allround wheelchair with multiple functions and is intended for use
both outdoors and indoors. The seat is adjustable in height, angle and depth. The backrest is adjust-
able in height, angle and shape. The footrests are adjustable in height, angle and depth.
Cross can be supplemented and adjusted if needs change. A large range of options and accessories
are available: Various types of backrest and legrest, fixing points for transport in mobility service buses,
anti-tips, and various types of handrims and brakes etc.
Cross has the best prerequisites to create comfort, functionality and good manoeuvrability.
Crash test
Etac’s wheelchairs are tested in accordance with ISO 7176-19 and ISO 10542. These ISO standards
specify requirements for the design of the wheelchair’s restraint points, how the wheelchair and the
user are secured in the vehicle, and also describe how tests should be carried out and how the test
results should be interpreted. Etac’s wheelchairs are crash tested at the Technical Research Institute
of Sweden. The tests were carried out with normal settings on the wheelchairs (see manual for the
respective wheelchair) and with an UNWIN_WWR/ATF/K/R restraining device and an UNWIN_WWR/
HD/ATF/K/R 3-point belt.
The cross-folded wheelchairs Cross, Twin and Transit were supplemented with securing points.
Seat widths:
From 35 cm to 55 cm
Max. user weight:
125 kg
Service life:
The product is tested and fulfils the demands stated in EN 12183. The main product’s
durability and lifetime is at least five years when used in accordance with intended use, the safety
instructions, the reconditioning manual and instructions for use in the user manual. The main product
consists of the chassis for seat and back support. Additional parts/accessories are handled in accord-
ance with the manual and reconditioning manual. The actual lifetime can vary, depending on how
much and how intensively the product is being used, but a maximum of 10 years. If the product is
intended for use after the service life period specified by Etac, it is the responsibility of the product
owner to ensure product functionality in accordance with the manual and reconditioning instructions.
If this cannot be ensured then the product should be taken out of use.
The following methods of surface treatment have been used:
Lacquered surfaces=Polyester powder coating
Non-lacquered aluminium parts=Anodized coating
Non-lacquered steel surfaces=Galvanized
