16
17
8:2 Backrest height
The backrest height is infinitely set-
table (See “The chairs possibilities”).
Undo the screws (A) 2-3 turns to set
the height of the backrest. Make
sure that both sides have the same
height by checking against the ruler
(B) on the rear of the back tube.
Tighten the screws securely.
8:3 Backrest angle
The backrest angle is infinitely vari-
able (See “The chairs possibilities”).
The angle is adjusted using the nut
on the inside of the rear wheel at-
tachments.
-
Loosen the nut on one of the
back tubes, set the desired
angle and tighten the nut
firmly again.
-
Repeat the procedure on the
other side.
Tools: 13 mm ring spanner.
8 Settings backrest mod. 2
8:1 Backrest
Risk of tipping: Always
check the position of
the anti-tips after ad-
justing the backrest.
The backrest is settable in height
and angle and has adjustable
backrest upholstery.
Tools: Allen key 5 mm.
(!) Check that the angle is the
same on both sides by com-
paring the distance between
the back tube and the armrest
guard.
Risk of tipping: Always check
the positioning of the anti-
tips after adjusting the back-
rest angle.