26
Right Wrong
A
10:6 Height of the footrests
Cross is supplied with flip-up
footrests, adjustable in height.
angle and depth.
Height
Loosen the locking handle (A)
on the legrest fully. Remove the
screw (B).
Set the height. Replace the
screw and handle. Tighten
securely.
Max. length: 51 cm
Min. length: 33 cm
(!) To make the footrests higher
than standard there are also
short/narrow legrests with
footrests with 8 cm shorter
attachment tubes.
10 Settings: legrests
B
-
To make the footrests lower
than standard there are
footrests
with 10 cm longer attachment
tubes.
For outdoor use the
footrests should be 4-5
cm above the ground.
Never stand on the foot-
rests as there is a risk of
tipping!
Make sure the screw -
head locks in the
hexagon hole.
The footrests can also be adjusted
in angle and depth.
Angle
Loosen the screws (C)
slightly. Set the footrest at the
desired position and retighten the
screws.
Tools: 5 mm Allen key.
Depth
The sides of the footrests
have different lengths. By chang-
ing the left side for the right they
will extend further forwards.
10:7 Angle and depth of the footrests
(!) If the depth is altered, the
angle must be adjusted.
C